How Often to Replace AllerAir Filters: 2026 Model-by-Model Guide
Most people buy an air purifier, plug it in, and forget about it. That works for a while. Then one day the air feels stale, the dust is back, or that cooking smell just won’t leave. Usually the filters are tired. This guide covers AllerAir filter replacement in simple terms: what each filter does, when to change it, and what to know for your model. Every timeline here comes from AllerAir’s own replacement filters page.
Why AllerAir Filter Replacement Matters in 2026
Smoky summers, heavy pollen seasons, and the chemical smell of new furniture have more people paying attention to indoor air. But a purifier is only as good as the filters inside it.
When a pre-filter clogs, the unit has to push harder to move air. When a carbon filter is used up, odors and gases slip right through. Regular AllerAir filter replacement keeps the machine working the way it was designed to.
One more thing. AllerAir says its schedule is for general home use. If your air is dustier or smokier than normal, you’ll probably need new filters sooner.
What Each AllerAir Filter Does
Your purifier uses up to four filters, and each one has a different job.
The pre-filter catches big particles and keeps the main filters from clogging.
The HEPA or Super HEPA filter removes fine particles from the air.
The activated carbon filter pulls out chemicals, gases, and odors.
The UV filter neutralizes biological contaminants.
AllerAir Filter Replacement Schedule
Here’s the timeline AllerAir recommends for a typical home:
Filter | Replace Every |
Pre-filter | 3 months |
HEPA or Super HEPA | 2 to 3 years |
Activated carbon | 2 to 3 years |
UV | 1 year |
The pre-filter is the one you’ll swap most often. The rest are long-term jobs, so a calendar reminder helps.
AllerAir HEPA Filter Replacement
The HEPA filter grabs the tiny particles the pre-filter lets through. Over time it fills up, and the purifier can’t clean as well. AllerAir suggests changing a HEPA or Super HEPA filter every 2 to 3 years.
If you notice weaker airflow or more dust on your shelves, the filter may be full. Living with pets or running the unit in a dusty room? Aim for the early end of that range when you plan your AllerAir HEPA filter replacement.
AllerAir Carbon Filter Replacement
Carbon filters deal with smells, gases, and chemicals. In a normal home they also last about 2 to 3 years.
There’s a catch, though. Activated carbon has a shelf life of 5 years, so a spare filter that’s been sitting in a closet for ages may not be much use. Buy it when you need it.
If cooking odors, smoke, or chemical smells start coming back, it’s time to look at your carbon filter. In a busy or smoky space, AllerAir carbon filter replacement may need to happen sooner than the 2-year mark.
AirMedic Pro 6 Filter Replacement
The AirMedic Pro 6 is made for big spaces. AllerAir lists it for rooms up to 2,000 square feet. That’s a lot of air moving through one machine, so check the pre-filter more often than you think you need to.
The timeline for AirMedic Pro 6 filter replacement matches the table above: pre-filter every 3 months, HEPA and carbon every 2 to 3 years, and UV once a year. If you’re unsure which filters fit your unit, AllerAir’s team can sort it out for you by phone or chat.
Model-by-Model Notes
AllerAir lists this same general schedule for several series:
AllerAir 4000, 5000, and 6000
AirMedic Pro 5 and AirMedic Pro 6
AirMed, AirMedic Plus, and Airtube
There’s also a replacement video on AllerAir’s site for AirMedic 4, 5, and 6 units, plus the 4000, 5000, and 6000 series. It’s worth a watch before your first swap.
Simple Ways to Stay on Schedule
Write the install date on a sticky note and stick it on the unit.
Set a phone reminder every 3 months for the pre-filter.
Mark the UV filter date on your calendar for next year.
Change filters early after a smoky season or a big cleaning project.
Frequently Asked Questions
How often should I do AllerAir filter replacement?
It depends on the filter. Pre-filters need changing every 3 months, HEPA and carbon filters every 2 to 3 years, and UV filters once a year.
Can I wash my HEPA filter?
AllerAir’s schedule is built around replacing filters, not cleaning them. Check your manual or ask the AllerAir team before you try anything else.
Do I need to replace every filter at once?
No. Each filter wears out on its own timeline, so you can change them separately.
Why does my purifier smell?
An old carbon filter can stop holding onto odors. If a smell shows up before the 2-year mark, inspect the filter and think about how much smoke or chemical fumes your room sees.
How do I know which filter fits my AirMedic Pro 6?
Visit AllerAir’s replacement filters page or call the team. They’ll match the right parts to your model.
Keep Your Air Cleaner with Regular AllerAir Filter Replacement
Staying on top of AllerAir filter replacement isn’t hard once you have the dates written down. Pre-filter every 3 months, UV once a year, and HEPA and carbon every 2 to 3 years. Shorten those times if your air is rough.


Comments